a7750

A NEW POWER IS HERE

Norcar a7750 is bringing new technology and performance to miniloaders. The a7750 is using a 50 hp Stage V diesel engine that increases the performance in pulling force, speed and hydraulic power. The new low center of mass frame gives stability to work with full lifting power without adding extra counterweights.

Norcar a7750 also comes with an upgraded driver environment thanks to the new rollover canopy. A safe workplace with easy access, good visibility and excellent ergonomics.  

Norcar a7750 continues with the Norcar Heavy Duty build and design. It has a centered lifting boom, welded frame and metal engine hood and covers. The a7750 is a new Norcar that is once again loaded with power.
Add Power to Your Work!

Technical data

Engine

Make
Kubota
Model
D 1803-CR-T E5B
Cylinders
3
Fuel type
Diesel
Cylinder volume (cm­³)
1826

Power

SAE, gross power (kW/hp)
37/49,6
Max gross torque (Nm)
150
At engine speed (r/min)
1600
Max engine speed without load (r/min)
2900

Electrical system

Battery (V-Ah)
12-77
Alternator (A)
70

Service volumes

Cooling system (l)
7
Engine oil (l)
7
Fuel tank (l)
27
Hydraulic tank (l)
56
Hydraulic system total volume (l)
61

Performance

Lifting power hydraulic (kg)
2100
Breakout force 50 cm (kg)
1500
Tipping load, straight (kg)
1500+
Tipping load, articulated (kg)
900+
Operating weight (kg)
2170
Drive speed low (km/h)
0 - 14
Drive speed high (km/h)
0 - 28
Pulling force low (kg)
1900
Pulling force high (kg)
950

Hydraulic system

Working hydraulics (l/min)
70
System pressure (bar)
240
Drivetrain hydraulics (l/min)
124
Drivetrain max system pressure (bar)
400

Cycle times

Raising boom (s)
3,6
Lowering boom (s)
2,2
Folding in bucket (s)
2,5
Tipping bucket (s)
2,2
Steering wheel rotations L/R (rev)
4/5

Roll bar ROPS/FOPS, seatbelt
Led work lights, front (roof)
Electrically maneuvered parking brake / automatic safety system
Float on the lifting boom
Hand throttle / Foot throttle
Digital display 4,3” dashboard information
Suspension seat with armrest
Adjustable steering column

Standard Equipment

  • Extension Boom

    750 mm telescope gives good lifting height and reach. Electronically controlled with lifting boom's joystick.

  • Parallel leveller

    Keeps equipment in the set position regardless of the boom's movements. Increases safety and precision during lifts, especially with pallet forks.

  • Hydraulic Oil Cooler

    Maintains hydraulic oil's temperature at correct level while operating tools that require high oil flow during long driving periods.

  • Load Warning System

    Load warning provides a good overview of load weight and warns of the risk of tipping. The load warning can easily be calibrated to different counter weight alternatives.

  • Two Speed Ranges

    Change between pulling force and speed.
    Low gear: 0-14 km/h, pulling force 1900 kg
    High gear: 0-28 km/h, pulling force 950 kg.

  • High Capacity Hydraulics

    Dual working hydraulic pumps provide selectable flow (70 l/min) for hydraulic outlets. Telescope extension boom and external hydraulics work independently of each other, regardless of the boom’s movements.

  • Automotive

    Automotive drive system allows the operator to change direction using a control switch on the loaders joystick. The loader is easy to operate and especially suitable for loading, janitorial jobs and when there’s a need for driving longer distances. Automotive F-N-R drive system with inching pedal.

  • MultiFaster Quick release coupling

    The MultiFaster Quick releas makes changes of hydraulic tools easy and quick. All the hydraulic connections are completed with a simple hand motion and makes it impossible to cross connect. Pressure is automatically released and no oil will leak.

  • Traction control

    Provides better traction on slippery or uneven surfaces. Traction is guaranteed on the same side wheels.

  • Extension Boom
  • Parallel leveller
  • Hydraulic Oil Cooler
  • Load Warning System
  • Two Speed Ranges
  • High Capacity Hydraulics
  • Automotive
  • MultiFaster Quick release coupling
  • Traction control

Optional extras

  • Hydraulic Quick Lock

    Change attachments quickly and easily without leaving the driver’s seat.

    7004569
  • Oscillation lock

    Locks the loader's pendular movement in the joint. Can be used during eg. leveling tasks when the tool needs to be parallel to the rear wheels.

    7004619
  • Speed control

    Feature for maintaining fixed driving speed when engine speed is adjusted to maintain continous flow for hydraulically powered tools ie. lawnmower.

    7008568
  • Seat Heater

    Heat in the seat's sitting part increases comfort when driving in cold weather.

    7004605
  • Comfort seat

    Comfort seat

    7006830
  • Comfort seat, electrically heated

    Comfort seat with electrically heated seat and back

    7006831
  • Hydraulic outlet rear

    Double acting hydraulic outlet (R1, R2) and free return (R3). Controls hydraulic attachments directly with joystick buttons. Rear hydraulic outlets should not be connected at the same time as hydraulic outlet, front.

    7008592
  • Rear view mirrors

    Rear view mirrors mounted on each side of the loader provide a comfortable and secure drive.

    7008565
  • Engine Pre-heater

    Improves starting ability and decreases wear during cold starts. Recommended plug-in time 30 min.

    7008578
  • Counterweight System

    Handy and compact counterweight for a-series loaders. The counterweight’s and accessories’ bracket is installed easily with a bolted connection on the chassis. Counterweights are selected as needed and locked in place with a through bolt. The counterweights are designed with lifting points and notches in order to facilitate manual handling. Hitch can be attached to the counterweight bracket.

    Bracket (18 kg): 7008601
    Counterweight (29 kg): 7008285

    7008284
  • Fender flares

    Heavy-duty fender flares

    7007645
  • Beacon lights

    Warns surroundings of working vehicle.
    7004576
  • Trima/SMS

    Attachment coupling plate Trima / SMS with hydraulically operated locking pins

    7008257
  • Pro led work lightning

    High performance LED work lights in front, rear and under lifting beam6600 lumen total.

    7006039
  • Extra Hydraulic Outlet, front

    Electrically operated double-acting hydraulic outlet (4 and 5). Provides the ability to control several hydraulic functions on attachments directly with buttons on the joystick.

    7004571
  • Hitch

    Hitch with standard 50 mm ball.
     

    Mounting Plate 7008600 or Counterweight bracket 7008601 needed for installation.

    7004611
  • Hitch combo

    Hitch with standard 50 mm ball combined with pin for trailer towing eye.

    Mounting Plate 7008600 or Counterweight bracket 7008601 needed for installation.

    7004613
  • Mounting plate

    Mounting plate for attaching hitch.

    7008600
  • Hydraulic Quick Lock
    7004569
  • Oscillation lock
    7004619
  • Speed control
    7008568
  • Seat Heater
    7004605
  • Comfort seat
    7006830
  • Comfort seat, electrically heated
    7006831
  • Hydraulic outlet rear
    7008592
  • Rear view mirrors
    7008565
  • Engine Pre-heater
    7008578
  • Counterweight System
    7008284
  • Fender flares
    7007645
  • Beacon lights
    7004576
  • Trima/SMS
    7008257
  • Pro led work lightning
    7006039
  • Extra Hydraulic Outlet, front
    7004571
  • Hitch
    7004611
  • Hitch combo
    7004613
  • Mounting plate
    7008600

Tires

  • Tire 27 x 8,5 - 15 IN

    Durable multi-purpose tire that can withstand heavy loads. Suitable for work on harder surfaces such as asphalt, concrete, and hard packed gravel.
    Machine width 105 cm.

    7006083
  • Tire 320/60-12 TR

    Durable, tractor patterned tire that can withstand heavy loads. Suitable for work on hard surfaces but also gives good traction on soft ground. Machine width 127 cm.

    7004563
  • Tire 400/45 - 15,5 IN

    Durable multi-purpose tire that can withstand heavy loads. Suitable for work on harder surfaces such as asphalt, concrete, and hard packed gravel.

    Machine width 142 cm.

    7006348
  • Tire 320/55 - 15 TR

    Tractor patterned tire. Provides good traction and is suitable for softer surfaces such as soil, sand, and gravel.Tread pattern is designed to keep the tire clean while driving on wet surfaces.
    Machine width 127 cm.

    standard
  • Tire 320/55 - 15 GR

    Densely patterned tire. Soft tire that is gentle to surfaces and grips well. Suitable for work on grass, gravel paths, and roads. The tire is also good on snow and ice. Machine width 127 cm.

    7004565
  • Tire 27 x 8,5 - 15 IN
    7006083
  • Tire 320/60-12 TR
    7004563
  • Tire 400/45 - 15,5 IN
    7006348
  • Tire 320/55 - 15 TR
    standard
  • Tire 320/55 - 15 GR
    7004565

Tools